Press Release | 9 Dec 2011 | Belgium
MEMS energy harvester for shock-induced energy harvesting in car tires
Imec and Holst Centre have announced that they have made a micromachined harvester for vibration energy with a record output power of 489µW. Measurements and simulation show that the harvester is also suited for shock-induced energy harvesting in car tires, where it could power built-in sensors. In a tire, at 70km/h, the new device can deliver a constant 42µW, which is enough to power a simple wireless sensor node. These results, obtained within the research centre's program for Micropower Generation and Storage, are presented at the 2011 IEEE International Electron Devices Meeting (IEDM) in Washington (December 7-9).
Imec's innovative harvester consists of a cantilever with a piezoelectric layer sandwiched between metallic electrodes, forming a capacitor. At the tip of the cantilever a mass is attached, which translates the macroscopic vibration into a vertical movement - putting strain on the piezoelectric layer and generating a voltage across the capacitor. As piezoelectric material, AlN (aluminum nitride) was chosen. The harvesters are packaged with a 6-inch wafer scale vacuum packaging process. The micromachining production process is compatible with low-cost mass-production fabrication.
The harvester has a record output power of 489µW when the vibrations closely match the MEMS' resonance vibration, which in this case is 1011Hz. Together with an automotive partner, imec also validated the use of the harvester for use in car tires. These submit the harvester to regular shocks, depending on the car's speed and the characteristics and condition of the tire. Each shock will displace the mass, after which it will start to ring down at its natural resonance frequency. During this ring-down period, which depends on the quality factor Q of the harvester, part of the mechanical energy is harvested. It is shown that in this way, a constant power output as high as 42µW can be harvested at a speed of 70km/h.
Micromachined vibration harvesters such as these are ideal devices to generate electricity from machines, engines and other industrial appliances which vibrate or undergo repetitive shocks. In these environments, they will power miniaturized autonomous sensor nodes, in situations where battery replacement is not sustainable or practical. Harvesters will allow sustainable monitoring on a massive scale. One example is Tire Pressure Monitoring Systems (TPMS) and its successors: a car tire with built-in sensors that monitor e.g. the tire integrity and pressure, the road condition, or the driving style.
Imec performs research in nanoelectronics. Imec delivers industry-relevant technology solutions. Imec is headquartered in Leuven, Belgium, and has offices in Belgium, the Netherlands, Taiwan, US, China, India and Japan. Its staff of about 1,900 people includes more than 500 industrial residents and guest researchers. In 2010, imec's revenue (P&L) was 285 million euro. Further information on imec can be found at www.imec.be .
Imec is a registered trademark for the activities of IMEC International (a legal entity set up under Belgian law as a "stichting van openbaar nut"), imec Belgium (IMEC vzw supported by the Flemish Government), imec the Netherlands (Stichting IMEC Nederland, part of Holst Centre which is supported by the Dutch Government), imec Taiwan (IMEC Taiwan Co.) and imec China (IMEC Microelectronics (Shangai) Co. Ltd.) and imec India (Imec India Private Limited).
About Holst Centre
Holst Centre is an independent open-innovation R&D centre that develops generic technologies for Wireless Autonomous Transducer Solutions and for Systems-in-Foil. A key feature of Holst Centre is its partnership model with industry and academia around shared roadmaps and programs. Holst Centre was set up in 2005 by imec (Flanders, Belgium) and TNO (The Netherlands) with support from the Dutch Ministry of Economic Affairs and the Government of Flanders. It is named after Gilles Holst, a Dutch pioneer in Research and Development and first director of Philips Research. Located on High Tech Campus Eindhoven, Holst Centre benefits from the state-of-the-art on-site facilities. Holst Centre has over 150 employees from around 25 nationalities and a commitment from more than 30 industrial partners.
Visit us at www.holstcentre.com
- Energy Harvesting and Storage for Electronic Devices 2014-2024: Forecasts, Technologies, Players
- Thermoelectric Energy Harvesting 2013-2023: Devices, Applications, Opportunities
- Piezoelectric Energy Harvesting 2013-2023: Forecasts, Technologies, Players
- Energy Harvesting Journal
- Wireless Power Transmission for Consumer Electronics and Electric Vehicles 2014-2024
- Energy Harvesting/Regeneration for Electric Vehicles Land, Water & Air 2014-2024
- Organic Photovoltaics (OPV) 2013-2023: Technologies, Markets, Players
- Dye Sensitized Solar Cells (DSSC/DSC) 2013-2023: Technologies, Markets, Players
- Analysis of Energy Harvesting Applications
- Wireless Sensor Networks (WSN) 2014-2024: Forecasts, Technologies, Players
- Electrochemical Double Layer Capacitors: Supercapacitors 2014-2024
- Batteries & Supercapacitors in Consumer Electronics 2013-2023: Forecasts, Opportunities, Innovation
- Thin Film Photovoltaics 2012-2022: Forecasts, Technologies, Analysis
Energy Harvesting and Storage for Electronic Devices 2014-2024: Forecasts, Technologies, Players
Thermoelectric Energy Harvesting 2013-2023: Devices, Applications, Opportunities
Piezoelectric Energy Harvesting 2013-2023: Forecasts, Technologies, Players
Wireless Power Transmission for Consumer Electronics and Electric Vehicles 2014-2024
Energy Harvesting/Regeneration for Electric Vehicles Land, Water & Air 2014-2024
Organic Photovoltaics (OPV) 2013-2023: Technologies, Markets, Players
Dye Sensitized Solar Cells (DSSC/DSC) 2013-2023: Technologies, Markets, Players
Analysis of Energy Harvesting Applications
Wireless Sensor Networks (WSN) 2014-2024: Forecasts, Technologies, Players
Electrochemical Double Layer Capacitors: Supercapacitors 2014-2024
Batteries & Supercapacitors in Consumer Electronics 2013-2023: Forecasts, Opportunities, Innovation
Thin Film Photovoltaics 2012-2022: Forecasts, Technologies, Analysis
Small connection, big implications: Wiring up carbon-based electronics
X-ray detector on plastic delivers medical imaging performance
Thin-film PV world record with 20.9% CIS cell